HEATMOS H14CU/H13CU EN-Standard HEPA Filter (350°C)

Product Overview

H14CU/H13CU is an EN 1822-compliant heat-resistant HEPA filter for continuous operation at 350°C (peak 400°C × 1h), available in H13 and H14 efficiency grades (@ MPPS). Its mini-pleats construction supports scan testing, making it the preferred leak-free filter for pharmaceutical depyrogenation tunnels. Key features ・Continuous operation up to 350°C, peak 400°C × 1h ・EN 1822 H13 / H14 compliant (@ MPPS) ・Mini-pleats: high airflow, low pressure drop ・Leak-free, scan-testable ・H13: 99.95% / H14: 99.995% Target industries：Pharmaceutical

Features & Specifications

No.	Model	Efficiency	W (mm)	H (mm)	D (mm)	Airflow (CMM)	Airflow (CMH)	Initial PD (Pa)
1	H14CU-Z-Q-FS4CS	99.995%@MPPS(H14)	305	610	150	11.0	660	270
2	H14CU-Z-Q-FS4CS	99.995%@MPPS(H14)	457	457	150	12.5	750	270
3	H14CU-Z-Q-FS4CS	99.995%@MPPS(H14)	762	457	150	22.0	1320	270
4	H14CU-Z-Q-FS4CS	99.995%@MPPS(H14)	457	610	150	17.5	1050	270
5	H14CU-24-Q-FS4CS	99.995%@MPPS(H14)	610	610	150	24.0	1440	270
6	H14CU-Z-Q-FS4CS	99.995%@MPPS(H14)	762	610	150	30.5	1830	270
7	H14CU-Z-P-FS4CS	99.995%@MPPS(H14)	305	610	292	16.5	990	270
8	H14CU-Z-P-FS4CS	99.995%@MPPS(H14)	457	610	292	25.5	1530	270
9	H14CU-35-P-FS4CS	99.995%@MPPS(H14)	610	610	292	35.0	2100	270
10	H14CU-Z-P-FS4CS	99.995%@MPPS(H14)	762	610	292	44.0	2640	270
11	H13CU-Z-Q-FS4CS	99.95%@MPPS(H13)	305	610	150	11.0	660	250
12	H13CU-Z-Q-FS4CS	99.95%@MPPS(H13)	457	457	150	22.0	1320	250
13	H13CU-Z-Q-FS4CS	99.95%@MPPS(H13)	457	610	150	17.5	1050	250
14	H13CU-24-Q-FS4CS	99.95%@MPPS(H13)	610	610	150	24.0	1440	250
15	H13CU-Z-Q-FS4CS	99.95%@MPPS(H13)	762	610	150	30.5	1830	250
16	H13CU-Z-P-FS4CS	99.95%@MPPS(H13)	305	610	292	16.5	990	250
17	H13CU-Z-P-FS4CS	99.95%@MPPS(H13)	457	610	292	25.5	1530	250
18	H13CU-35-P-FS4CS	99.95%@MPPS(H13)	610	610	292	35.0	2100	250
19	H13CU-Z-P-FS4CS	99.95%@MPPS(H13)	762	610	292	44.0	2640	250

LINE @baisheng

Email：sales@baisheng-tech.com

Phone：+886-2-25981958

Detailed Description

HEATMOS is Nippon Muki’s EN-standard HEPA range developed for GMP-regulated pharmaceutical environments. The mini-pleats construction increases airflow per face area by 30-50% versus separator-type filters while lowering pressure drop. Scan-testable to satisfy GMP Annex 1.

Materials & Construction

Property	Specification
Filter frame	STAINLESS STEEL
Media	GLASS PAPER
Max. temperature	350°C (Max. 400°C/1h)
Separator	STAINLESS STEEL
Gasket	GLASS PAPER
Grille (downstream)	-
Grille (upstream)	-
Sealant	GLASS FIBER + CERAMIC
Max airflow	Can be calculated on request
Max final PD (Pa)	500

Airflow vs Pressure Drop (representative)

Representative H13 curves shown. H14 has slightly higher initial PD (~+20 Pa) at the same size.

Applications

- Depyrogenation tunnels in pharmaceutical manufacturing - High-temperature zones of aseptic filling lines - Biopharmaceutical high-temperature processing

Selection Notes

- **H13 (99.95%)** — meets EU GMP general clean zone requirements. - **H14 (99.995%)** — meets ISO Class 5 or stricter. - **150 mm (Q) / 290 mm (P)** — choose by airflow demand and installation depth.